Orthopedic Implant Product News & Updates

Product News

The Evolution of PRP Preparation Technology: From Conventional Methods to Advanced Systems

Nov. 17, 2026

Platelet-rich plasma (PRP) has attracted growing interest in regenerative medicine and orthopedic applications. As research and clinical experience have developed, PRP preparation technology has also evolved, with increasing attention to platelet enrichment, recovery efficiency, component separation, and preparation consistency.

Early PRP preparation methods relied on relatively conventional blood collection and centrifugation procedures. Improvements in separation structures, closed preparation systems, and processing protocols have gradually made PRP preparation more integrated and convenient.

This article reviews the key stages in the development of PRP preparation technology and introduces the design features of the ATOM PRP Preparation System.


1. Early PRP Preparation: Conventional Centrifugation

Early PRP preparation primarily relied on centrifugation to separate the components of autologous whole blood.

After blood collection, the sample was processed under centrifugal force. Differences in the sedimentation characteristics of red blood cells, white blood cells, and platelets allowed the blood components to be separated into different fractions.

However, preparation results could vary depending on several factors:

  • Centrifugation speed and duration

  • Blood collection and anticoagulant protocols

  • Separation and collection techniques

  • Platelet concentration and recovery

  • Red blood cell and leukocyte contamination

These factors highlighted the need for more controlled preparation procedures and improved separation designs.

Conventional centrifugation process for platelet-rich plasma preparation


2. Improving PRP Separation and Platelet Recovery

As PRP technology developed, greater attention was given to the quality and consistency of the final platelet-enriched fraction.

Rather than focusing only on platelet concentration, improved preparation methods also considered platelet recovery, leukocyte content, and residual red blood cell contamination.

Several technical considerations became increasingly important:

  • Platelet Enrichment:The objective is to obtain a platelet concentration higher than the baseline level in whole blood. However, a higher concentration alone does not necessarily indicate better clinical performance.

  • Platelet Recovery:Platelet recovery describes the proportion of platelets retained in the final PRP preparation relative to the original blood sample. It provides additional information about the efficiency of the separation process.

  • Component Separation:Improved separation structures aim to collect the platelet-enriched fraction while reducing unwanted red blood cell or leukocyte contamination, according to the intended PRP formulation.

  • Processing Consistency:More clearly defined collection procedures and centrifugation protocols can help reduce variation between preparation cycles.


3. Four Generations of PRP Preparation Technology: A Quality-Control Comparison

The evolution of PRP preparation technology can be understood through changes in platelet enrichment, concentration stability, separation procedures, processing time, red blood cell removal, and leukocyte control.

The following table presents a four-generation quality-control classification, illustrating how PRP preparation systems have developed from basic separation tubes toward more integrated systems with improved control over blood component separation.

Comparison of Four Generations of PRP Preparation Technology
Quality-Control ParameterFirst GenerationSecond GenerationThird GenerationFourth Generation
Platelet Enrichment<2.5×<2.5×>3×>4×
Concentration StabilityUnstableStableUnstableStable
Number of Separation Cycles1 or 2121
Separation Time>30 minApproximately 15 min>30 minApproximately 12 min
Residual Red Blood CellsUsually >5%<1%>2%<1%
Leukocyte ControlVery limited adjustabilityLeukocyte-poor or leukocyte-freeLeukocyte-richAdjustable according to requirements
Representative Product TypeSimple tubeSeparation gel tubeThree-chamber tubeTwo-chamber tube

Note: This table presents the four-generation classification and performance ranges shown in the supplied reference. It should be understood as a comparative technical framework rather than a universally standardized international classification. Actual performance varies according to product design, blood characteristics, centrifugation protocols, and measurement methods.

Key Technological Improvements Across Four Generations


4. The Development of More Integrated PRP Preparation Systems

A further development in PRP technology has been the integration of blood collection, centrifugation, component separation, and PRP collection into dedicated preparation systems.

Compared with manually coordinated procedures, an integrated system can provide a more organized preparation workflow.

Important design considerations include:

  • Sealed preparation structure: Supports controlled handling of the blood sample during processing.

  • Dedicated separation chambers: Help distinguish the platelet-enriched fraction from other blood components.

  • Simplified operation: Designed to make the preparation process more convenient.

  • Defined processing protocols: Support repeatable operation when the specified procedure is followed.

  • Optimized collection structure: Designed to facilitate collection of the target platelet-enriched fraction.

These developments reflect a broader direction in PRP technology: moving from basic blood separation toward more integrated and protocol-based preparation solutions.

A closed or sealed design may support controlled handling, but it does not independently guarantee sterility. Appropriate aseptic procedures and product instructions remain essential.


5. Current PRP Technology: Balancing Enrichment, Recovery, and Efficiency

Modern PRP preparation systems are increasingly evaluated through several performance indicators rather than platelet concentration alone.

Performance IndicatorTechnical Significance
Platelet Enrichment FactorIndicates how much the platelet concentration increases compared with baseline whole blood
Platelet Recovery RateIndicates the proportion of platelets recovered in the final preparation
PRP YieldRefers to the volume of the final platelet-enriched preparation
Blood Component SeparationRelates to the separation of platelets, leukocytes, and red blood cells
Processing TimeReflects the time required for the specified preparation protocol

These parameters should be considered together. The ideal PRP formulation depends on the intended application, and no single performance indicator can fully determine the biological or clinical quality of PRP.

It is also important to distinguish between laboratory performance data and clinical outcomes. A higher platelet enrichment factor does not automatically establish superior treatment results.


6. ATOM PRP Preparation System: An Integrated Preparation Solution

The ATOM PRP Preparation System is designed to isolate platelet concentrates from autologous whole blood through centrifugation.

Its structural design focuses on platelet enrichment, component separation, and convenient preparation.

According to the official product information, the system offers two configurations: Regen-R (Regular) and Regen-B (Bio-engineered).

Key Design Features

1. Integrated Preparation Structure: The system combines blood collection and component separation within a dedicated preparation structure, supporting an organized PRP processing workflow.

2. Platelet Enrichment and Recovery: The product is designed to concentrate platelets in the designated collection section. Its published specifications include a platelet enrichment factor of 4–6× and a platelet recovery rate of at least 80%.

3. Component Separation: The lower chamber is designed to separate the red blood cell fraction, helping minimize unwanted contamination during PRP collection.

4. Sealed Design: The preparation structure features a sealed design intended to support controlled sample handling during processing.

5. Two Preparation Configurations: Regen-R and Regen-B provide different specified centrifugation times while sharing the listed blood collection volume, PRP yield, platelet enrichment factor, and recovery rate.

Performance Specifications
SpecificationRegen-R (Regular)Regen-B (Bio-engineered)
Blood Collection Volume25-30 mL25-30 mL
PRP Yield /Volume3-5 mL3-5 mL
Platelet Enrichment Factor4-6x4-6x
Platelet Recovery Rate≥80%≥80%
Centrifugation ProtocolDouble spin, 8 minDouble spin, 6 min

Note: Specifications are based on the ATOM product page. Actual preparation results may vary depending on blood characteristics, equipment settings, and operating conditions. Please refer to the current instructions for use for the complete preparation protocol


7. Future Directions in PRP Preparation Technology

PRP technology continues to develop, with increasing attention to preparation consistency, product characterization, and application-specific formulations.

Potential areas of continued development include:

  • More controlled platelet enrichment and recovery

  • Improved separation of blood components

  • More standardized preparation protocols

  • Simplified and integrated processing systems

  • Better characterization of platelet and leukocyte content

  • Application-specific PRP formulations

As research progresses, the evaluation of PRP systems is likely to place greater emphasis on both preparation performance and the biological characteristics of the final product.


Conclusion

The development of PRP preparation technology reflects a gradual shift from conventional centrifugation procedures toward more integrated systems designed to improve component separation, platelet enrichment, recovery, and processing convenience.

The ATOM PRP Preparation System offers Regen-R and Regen-B configurations, with published specifications including a 4–6× platelet enrichment factor, a platelet recovery rate of at least 80%, and a PRP yield of 3–5 mL.

By combining a dedicated separation structure with defined preparation configurations, the system provides an option for professional users seeking an integrated PRP preparation solution.


Related Products

Talk to ATOM orthopedic experts

We offer a full range of quality spine, trauma, joint, and sports medicine products — fast delivery, consistent quality.

Contact Us

Contact Us

Tel.: +86 157 5731 9513

E-mail: info@atommd.com

Add.: Room 502, 5th Floor, Deyuan Jiuhe Building, No. 10 Hongyan Road, Chaoyang District, Beijing

Contact Us

Contact Us

Copyright @ATOM Medical Devices Co., Ltd. All Rights Reserved Sitemap

info@atommd.com

+86 157 5731 9513

We Value Your Privacy

Our site uses cookies to improve your experience. By continuing to use our site, you agree to our Cookie Policy and Privacy Policy.